You have no items in your shopping cart.

Bodyfillers

Filters
per page
7400.10082
Multi Putty 1K NC Multi Putty 200g multifunctional lightweight putty. 25% lighter than standard putties. Very easy application and easy sanding, with no sandpaper clogging. Working time: 3-5mins Drying time: 16-30min Sanding: P120-320
€6.1400 excl tax
7400.10083
Easy Sand 2K Flowable Filler 1Litre. Finish Line Liquid Glaze is a flowable polyester filler putty for finishing, blending and skim coating bodywork, pinholes, grind marks, low spots, and other surface imperfections. This putty adheres well to steel, galvanized, other zinc coated steel, aluminium, and most rigid to semi-rigid fiberglass and thermo-set plastics. Has a higher resin content than traditional fillers which makes it less porous. This ensures lower moisture penetration and lower absorption of primer. Process time is therefore faster & a non-shrinkage finish is ensured. Drying time: 2.5-3h at 20 degrees Celsius Drying time: 15-20min at 60 degrees Celsius Film thickness: 40-180μm Normal coats: 1-2
€15.8500 excl tax
7400.10071
Fibre DIY 2K Fibreglass Repair Kit 250g - Fast curing Polyester Repair Kit for the repair of rust holes and GRP components. Kit includes hardener and glass-fibre-mat. Quick-drying polyester resin filters the mat and glass cloth excellently. Easy application. Contains additives which cause the reduction of styrene emissions during and after application, as well as an additive which causes the hardened laminate not to have a sticky surface after drying, which is particularly important when machining with abrasive materials. Excellent adhesion to steel surfaces. For car body repairs, construction and home DIY.
€8.1500 excl tax
7400.10081
Multi Putty Universal Plastic Putty 500g multifunctional lightweight putty. 25% lighter than standard putties. Very easy application and easy sanding, with no sandpaper clogging.
€11.9100 excl tax
7400.10084
Feather Sand Lightweight Putty multifunctional lightweight putty 4.5Kg. 25% lighter than standard putties. Very easy application and easy sanding, with no sandpaper clogging. Good for larger surface areas. Working time: 4-6mins Drying time: 20-30min Sanding: P120-320
€25.1800 excl tax
7400.10075
Glass Fibre Reinforced Putty 1.8Kg for all deep filling and bridging works. Excellent sanding properties. Can be used on all applications. Working time: 3-5mins Drying time: 16-30min Sanding: P120-320
€15.6800 excl tax
7400.10080
Multi-Fill Multifunctional Putty 1.8Kg combines the deep filling properties of a fill-putty with the high surface quality of a finishing putty. Due to its excellent density, it has very good shaping properties. It can also be used as a finishing putty, leaving a smooth surface without pores. Excellent sanding properties. Working time: 3-5mins Drying time: 16-30min Sanding: P120-320
€15.6800 excl tax
7400.35.190
Multi Master Service Line Polyfill 2K premium lightweight, easy-sand body filler 3 Litre.
€25.5100 excl tax
7400.10070
Spray-fill 2K Polyester Sprayable Grey Body Filler 3.7 Litre - Excellent adhesion on various substrates including GRP, Metal, Wood, Polyester Laminates and Hard Plastic. Excellent flow and filling properties enabling it to be applied over large areas Filling both small and deeper imperfections (pinholes and sanding marks) easily. Anti-corrosive and very easy sanding. Drying time: 15-20min at 20 degrees Celsius Film thickness: 30μm Normal coats: 2 Recoat after: 20min Sanding after: 3h
€49.1900 excl tax
1600.1019
Beetroot Board - Multi-layered mixing board supplied with 100 disposable sheets. For body filler, pastes etc.
€11.5400 excl tax
1600.1022
Finish Line Plastic Spreaders with a bevelled edge used to mix body fillers, pastes etc.
€4.1600 excl tax
R.ATH.107840
Metal Body Filler Spatula Set of four in different sizes. For mixing body fillers, pastes etc. Japan Style. Supplied in plastic bag.
€2.6800 excl tax
1620.2101
UNIPLAST hot stapler, is the fastest and most efficient solution for repairing plastics. It can repair and reinforce any piece of plastic such as bumpers, instrument panels, headlight supports etc. UNIPLAST is a small and easy to use device. Its configuration is very simple, an on/off button to start the device and an option for the temperature you want to heat the staple to. UNIPLAST has three different positions. Low temperature (L) for 1.5mm plastic thickness. Medium temperature (M) for 2mm plastic thickness. High temperature (H) suitable for more than 2mm plastic thicknesses. UNIPLAST provides you with an excellent repairing level and incredible savings in time and money.
€218.8300 excl tax
1620.2200
S Shape (100 units) - ø 0.6mm. Stainless Steel Clamp S 0.6mm format suitable for the repair of plastic.
€32.4500 excl tax
1620.2201
S Shape (100 units) - ø 0.8mm. Stainless Steel Clamp S 0.8mm format suitable for the repair of plastic.
€32.4500 excl tax
Close