Products tagged with 'bodyfillers'

Spray-fill 2K Polyester Sprayable Grey Body Filler 3.7 Litre - Excellent adhesion on various substrates including GRP, Metal, Wood, Polyester Laminates and Hard Plastic. Excellent flow and filling properties enabling it to be applied over large areas Filling both small and deeper imperfections (pinholes and sanding marks) easily. Anti-corrosive and very easy sanding. Drying time: 15-20min at 20 degrees Celsius Film thickness: 30μm Normal coats: 2 Recoat after: 20min Sanding after: 3h

Fibre DIY 2K Fibreglass Repair Kit 250g - Fast curing Polyester Repair Kit for the repair of rust holes and GRP components. Kit includes hardener and glass-fibre-mat. Quick-drying polyester resin filters the mat and glass cloth excellently. Easy application. Contains additives which cause the reduction of styrene emissions during and after application, as well as an additive which causes the hardened laminate not to have a sticky surface after drying, which is particularly important when machining with abrasive materials. Excellent adhesion to steel surfaces. For car body repairs, construction and home DIY.

Glass Fibre Reinforced Putty 1.8Kg for all deep filling and bridging works. Excellent sanding properties. Can be used on all applications. Working time: 3-5mins Drying time: 16-30min Sanding: P120-320

Multi-Fill Multifunctional Putty 1.8Kg combines the deep filling properties of a fill-putty with the high surface quality of a finishing putty. Due to its excellent density, it has very good shaping properties. It can also be used as a finishing putty, leaving a smooth surface without pores. Excellent sanding properties. Working time: 3-5mins Drying time: 16-30min Sanding: P120-320

Multi Putty Universal Plastic Putty 500g multifunctional lightweight putty. 25% lighter than standard putties. Very easy application and easy sanding, with no sandpaper clogging.

Multi Putty 1K NC Multi Putty 200g multifunctional lightweight putty. 25% lighter than standard putties. Very easy application and easy sanding, with no sandpaper clogging. Working time: 3-5mins Drying time: 16-30min Sanding: P120-320

Easy Sand 2K Flowable Filler 1Litre. Finish Line Liquid Glaze is a flowable polyester filler putty for finishing, blending and skim coating bodywork, pinholes, grind marks, low spots, and other surface imperfections. This putty adheres well to steel, galvanized, other zinc coated steel, aluminium, and most rigid to semi-rigid fiberglass and thermo-set plastics. Has a higher resin content than traditional fillers which makes it less porous. This ensures lower moisture penetration and lower absorption of primer. Process time is therefore faster & a non-shrinkage finish is ensured. Drying time: 2.5-3h at 20 degrees Celsius Drying time: 15-20min at 60 degrees Celsius Film thickness: 40-180μm Normal coats: 1-2

Multi Master Service Line Polyfill 2K premium lightweight, easy-sand body filler 3 Litre.

UNIPLAST hot stapler, is the fastest and most efficient solution for repairing plastics. It can repair and reinforce any piece of plastic such as bumpers, instrument panels, headlight supports etc. UNIPLAST is a small and easy to use device. Its configuration is very simple, an on/off button to start the device and an option for the temperature you want to heat the staple to. UNIPLAST has three different positions. Low temperature (L) for 1.5mm plastic thickness. Medium temperature (M) for 2mm plastic thickness. High temperature (H) suitable for more than 2mm plastic thicknesses. UNIPLAST provides you with an excellent repairing level and incredible savings in time and money.

S Shape (100 units) - ø 0.6mm. Stainless Steel Clamp S 0.6mm format suitable for the repair of plastic.

S Shape (100 units) - ø 0.8mm. Stainless Steel Clamp S 0.8mm format suitable for the repair of plastic.

U Shape (100 units) - ø 0.6mm. Stainless Steel Clamp U 0.6mm format suitable for the repair of plastic.

U Shape (100 units) - ø 0.8mm. Stainless Steel Clamp U 0.8mm format suitable for the repair of plastic.

V Shape (100 units) - ø 0.8mm. Stainless Steel Clamp V 0.8mm format suitable for the repair of plastic.

M Shape (100 units) - ø 0.7mm. Stainless Steel Clamp M 0.7mm format suitable for the repair of plastic.