Chemical Cleaning & Passivation

E-NOX Clean is a water-based cleaning gel that contains acid and is used to remove limescale and rust from metal surfaces. It can also be used on perpendicular surfaces. The gel brightens stainless steel, aluminum, and non-ferrous metals without damaging the metal itself. Importantly, it does not contain hydrofluoric, nitric, or hydrochloric acid and has reduced VOCs.

Etching and marking wand to suit Greising V2 and V3 machines.

For Neutralisation of Stainless Steel Electro Cleaning Chemical on stainless steel welding seams. after the pickling/cleaning process has been finished. Apply the product manually with a special pickling brush after the pickling process has been finished.

Degreasing and deoxidation is fundamental, in order to prevent eventual corrosion, aesthetic problems or spots during pickling, polishing, grinding and finishing treatments. Grease and oil residues may alter the efficiency of a pickling bath and prohibit picking paste from reacting. If organic molecules (made up essentially of carbon) are not removed, then damage to the matrix material and degradation of its characteristics will occur. Suitable for: Pre-cleaning before pickling, Removal of saline staining, Removal of surface rust and mild rouge, Removal of grease, Restoring and brightening of surface finishes, Removal of water staining and lime deposits, Removal of road surface water contamination.

Degreasing and deoxidation is fundamental, in order to prevent eventual corrosion, aesthetic problems or spots during pickling, polishing, grinding and finishing treatments. Grease and oil residues may alter the efficiency of a pickling bath and prohibit picking paste from reacting. If organic molecules (made up essentially of carbon) are not removed, then damage to the matrix material and degradation of its characteristics will occur. Suitable for: Pre-cleaning before pickling, Removal of saline staining, Removal of surface rust and mild rouge, Removal of grease, Restoring and brightening of surface finishes, Removal of water staining and lime deposits, Removal of road surface water contamination.

High strength pickling gel for the effective removal of weld discolouration on stainless 300 series. It is applied by PVC bristle brush or with acid resistant sprayer in a thick layer. Reaction time varies from a few minutes to many hours depending on stainless steel type, thickness & type of weld. Rinse with cold water & preferably with a pressure jet for effective removal of product & oxides. Please note that Skin and Eye protection should be worn when using this product and rinse water should be disposed of responsibly.

R.C. FUTUR DEK dba PLUS is a unique pickling paste FREE from nitric and hydrofluoric acid. Used for the removal of mild tig weld discolouration without leaving a white etch mark on stainless steel. Applied to the weld as a thick layer by acid brush free from iron to the weld. Reaction time is 30 minutes to 2 hours depending on weld. It is then rinsed thoroughly with chloride free water under pressure.

Electrolyte eco weld cleaning liquid. Hi power electrolyte inox system dek. Electrochemical pickling is used after welding for two purposes. To remove thermal oxide from steel, and to dissolve the layer of chromium-depleted material in order to restore the corrosion-resistant properties of stainless steel. Rinse plentifully.

R.C. Neutral Revolution is a neutralising solution working against acid residues after electrochemical cleaning process and pickling acids.

Water soluble solvent degreaser for the removal of glue and wax residues from metal surfaces. To use dampen a cloth with the product and wipe the surface treated. Product evaporates quickly. It is also possible to rinse it out with water.

Water soluble solvent degreaser for the removal of glue and wax residues from metal surfaces. To use dampen a cloth with the product and wipe the surface treated. Product evaporates quickly. It is also possible to rinse it out with water.

R.C. PASS OX NW is an innovative liquid free of nitric acid. It is specially engineered for creating a monomolecular protective oxide film on the stainless steel surface. Stainless steel is corrosion-resistant by nature, which might suggest that passivating them would be unnecessary. However, stainless steels are not completely impervious to rusting. In actual practice contaminants such as shop dirt or particles of iron from cutting tools may be transferred to the surface of the stainless steel parts during machining. NO RINSE FORMULA.

R.C. PASS OX NW is an innovative liquid free of nitric acid. It is specially engineered for creating a monomolecular protective oxide film on the stainless steel surface. Stainless steel is corrosion-resistant by nature, which might suggest that passivating them would be unnecessary. However, stainless steels are not completely impervious to rusting. In actual practice contaminants such as shop dirt or particles of iron from cutting tools may be transferred to the surface of the stainless steel parts during machining. NO RINSE FORMULA.

Heavy duty degreasing and deoxidiser liquid for stainless steel 300 series. Used for the removal of heavy oxidation with a light pickling effect. Applied by spray using an acid resistant sprayer. Can be diluted 1 to 1 with water. Product must be rinsed with chloride free water.

Heavy duty degreasing and deoxidiser liquid for stainless steel 300 series. Used for the removal of heavy oxidation with a light pickling effect. Applied by spray using an acid resistant sprayer. Can be diluted 1 to 1 with water. Product must be rinsed with chloride free water.