Products tagged with 'sealants'

Brush with nylon bristles, designed for the application of sealers.

Sealplast Brushable Sealer is a single-component product used in car refinishing to seal all joints in the bodywork, boots, and wheel arches. It is easy to apply and provides a durable and flexible seal. This sealer is designed to prevent moisture, dirt, and other contaminants from entering the vehicle through gaps in the bodywork. It is commonly used by car manufacturers and body shops for its effectiveness in preventing corrosion and rust.

For bonding windshields to vehicle bodyshells. Exposed bare steel should be primed with Sika 206G&P, exposed paint clean with Sika 205 and prime. Clean glass with Sika Activator or Sika Cleaner. Can be over painted, non-corrosive, sets hard.

25 meters of steel wire, particularly tough, very effective in cutting the polyurethane, due to its triangular shape which gives a greater capacity incision, resulting in convenient and simple faster cutting.

Bosseal – Complete Windscreen Fitting Kit: 310ml Cartridge, 30ml Activator and Primer, Lint Free Application Cloth.

Suitable for sealing, seam sealing & simple bonding. Fast curing, quick over paint time, can be sanded, silicone free.

Suitable for sealing, seam sealing & simple bonding. Fast curing, quick over paint time, can be sanded, silicone free.

A high-performance elastic gap-filling 1-C structural assembly adhesive that cures on exposure to atmospheric humidity to form a durable elastomer. Sikaflex contains no isocyanate.

Flexible sealant, can be sanded, Odourless, Adheres to a wide range of substrates, Can be painted over with most automotive paints (pre testing recommended). Also suitable for commercial vehicles.

Mono-component, liable polyurethane seam sealer, strong bond and polymerizes with air humidity. Ideal for sealing, filling and bonding body parts. Repaintable and sandable.

Mono-component, liable polyurethane seam sealer, strong bond and polymerizes with air humidity. Ideal for sealing, filling and bonding body parts. Repaintable and sandable.

This product is a one-component polyurethane sealer that comes in a cartridge and has a thick consistency, dries rapidly, and hardens when exposed to humidity in the air. It can be applied using a manual or pneumatic applicator gun. The sealer takes around 12 minutes to cure at 23ºC/50% humidity and should be used within 5 minutes of opening the cartridge at the same temperature and humidity level.

Used in order to prevent splashing when applying primer to bodywork or glass.

Sikaflex 529 AT is a sprayable 1-component Silane Terminated Polymer (STP) sealant that cures on exposure to atmospheric humidity. It is used for seam sealing of factory provided original structures (surface areas and beads) for vehicle body assemblies.

Sika Primer 206 G+P for fibre glass inside (Layup side), ABS, steel alu and other materials of the Sikaflex series 2XX and Sikatack. The priming colour black prevents from corrosion and improves the glue. Consumption approx. 150g/ m²